0

               (MADE IN USA) TO PURCHASE OR FOR DETAILED INFORMATION ON EACH PRODUCT SELECT BUY NOW AND CLICK ON ANY ITEM( PLEASE HELP BY AVOIDING CHINA KNOCKOFFS)

 READ our FAQ'S and watch our demonstration video below to see HOW WELL our Newel & Railing hardware can work for your next project!

See all of our Installation Videos HERE!

SPRING BOLT HARDWARE INSTALLS HIGH IN THE PROFILE SO WHEN DRILLING FOR BALUSTERS YOU WILL NOT DRILL INTO OUR HARDWARE.

CONNECT BOTH ENDS OF A RAIL BETWEEN 2 NEWEL POSTS IN MINUTES USING 1 DRILL BIT AND 1 DRIVER BIT. NO WOOD PLUGS ARE NEEDED TO CONCEAL THE HARDWARE.

<NO OTHER HARDWARE CAN PROVIDE LOAD TEST RESULTS>

Spring-Bolt Newel & Railing Hardware. Easiest way to connect most joints. 1/8" movement in all directions allows perfect profile alignment while providing strong permanent joints with no ugly, labor intensive wood plugs.

                           

THE INVENTOR

Roger Rock has been in construction for over 45 years. More than 30 of those years have been in the stair & railing business.

The Spring-Bolt Newel & Railing Hardware was invented to eliminate the unattractive look of having to use a LARGE WOOD PLUG to cover railing joint hardware. It was not Roger's main goal but it just so happens that the hardware installs QUICKER (2 minutes) than other hardware and requires just one drill bit and one driver to install. Using our hardware allows a person with moderate level of skill & two tools that are common to all who own even the most basic assortment of tools to install his or her railings that have strong and tight joints.

Assemble the joints dry to check for fit then add glue to the joint to make the joint permanent.