Newel Post-to-Deck, Inside, Spring Bolt™ Kit #30





Use to attach wood posts to a wood or concrete deck.

Requires SLOW SET Epoxy (See Below). 1 Pint Will Install 4 Kits.

Drill a 1 3/8″ hole 3 3/8″ deep in the bottom of the post and a 3 3/8″ deep hole into the floor. Attach a spring to the bottom of both holes. Fill both holes half full of epoxy. Insert the metal pin & twist the post onto the spring in the floor. Twist 3 more turns after the post has contacted the floor. Do not over tighten. Allow over night to cure. (Click on VIDEO below)